Foam-Tac's improved formula now contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. We've also added a special adhesion promoter to make the glue even stronger and more durable than before. Foam-Tac is the perfect solution for permanently bonding many types of foams including Depron & BlueCor as well as carbon fiber, balsa and plywood, plastics, and more. Foam-Tac dries clear, remains flexible, won't foam, and can glue control surfaces directly onto the RC airframe without hinge tape or any other kind of fastener.

*For RC Builders – Hands down, Foam-Tac is the best choice for building and repairing all parts of foam planes including motor mounts, control horns and rods, attaching servos, and tacking down wires.

Directions: All Surfaces must be clean and dry. Spread glue evenly on both sides of material to be bonded. All to air dry for a few seconds, press together and immediately pull apart. Wait a few seconds more and firmly press together and immediately pull apart. Wait a few seconds more and firmly press together for a permanent bond. Maximum bond is achieved within 24 hours or less.

Materials it bonds: Bonds all types of foam & plastics, smooth foam, rough foam, Styrofoam, Carbon Fiber, Depron, Balsa Wood & More

Cure Time: 24 Hours